Boat sinker Mould makes 2-4-6-8-10oz sinkers type One Hole Boat Wide Sinker. This sinker is extremely easy to make.
You save NZ$5.00
10-14-24oz Tombstone-1-Hole Sinker Mould. Also four different Tombstone Moulds available with various sizes ranging from 4oz to 80oz.
You save NZ$8.01
25oz Hapuka Sinker Mould. Aerodynamically descend to the bottom to avoid snagging.
You save NZ$5.01
Ball Sinkers Sinker Mould Model #011 makes 1/4, 1/2, 3/4, 1, 2, 3, 5oz Great popular and versatile sized sinker mould.
You save NZ$1.50
Product no.: Open-Cavity-Mould
Open Cavity Flat Rock Sinker Mould Sizes are 3oz 4oz, 5oz, mould will make two of each of size.
You save NZ$10.00
Product no.: 902-Large-Ladle
Large Sinker Mould Ladle This ladle is designed to make your own sinkers and jigs. Also avail in smaller size.
You save NZ$1.01
Product no.: 903-Small-Ladle
Small Sinker Mould Ladle This ladle is designed to make your own sinkers and jigs.Check out our large range of Mansfield sinker moulds.
You save NZ$2.00
This sinker is extremely easy to make. Using a greased nail the lead is poured in, once the lead has cooled in a few seconds the nail is pulled out with pliers and the mould is turned upside down. Presto! Sinkers as fast as you can pour them.
Tombstone or Graveyard sinker. Simply clamp the two halves together and pour the lead to the size you would like. Half full is 40 oz.
This sinker is designed to aerodynamically descend to the bottom in the shape to avoid snagging. Flat sides prevent the sinker rolling on the bottom of the boat.
Most of you will have some scrap lead lying around. Try visiting your local roofer/plumber or scrap dealer. Lead is worth around a $1 or $2 per kilo. Another excellent source is to use discarded wheel weights from your local tyre shop. These weights have a hardener added to them and work superbly as sinker and jig material. Although less durable for jigs, pure lead does work very well for us, so don't be put off using it!
The secret to making sinkers and jigs in volume is to have a large amount of lead in a molten state. To achieve this use a Mansfield Melting Pot which is curved inside to allow a ladle to scoop lead easily. Although not as effective, a cast iron pot will do at a pinch. Use a gas ring or BBQ to melt the lead. Ensure that you use adequate ventilation when melting lead as the fumes are toxic. A common mistake is not to melt your lead to a "bronze" colour which is substantially hotter than a liquid state. DO NOT under any circumstances allow moisture or water to get in contact with molten lead; it splatters dangerously!
Scrape off any impurities from your lead by simply scooping off the top layer of "rubbish" that forms once your lead has melted. Heat up your mould before pouring the molten lead into the mould. You may be using a hinged mould which can be clamped together using a D clamp. Use a ladle to pour the molten lead into your mould. Open mould once the lead has cooled sufficiently (this only takes a few seconds). Once the sinkers are completely cool, then remove them from the moulds.