ePRO Combi Inverter Charger 1600W/12V w/ Remote

ePRO Combi Inverter Charger 1600W/12V w/ Remote

Product no.: EPC-1600-12-KIT

In stock


Possible delivery methods: $7.99 Nation Wide Shipping SMALL ITEMS UP TO 10KG, $35.00 Large Boxes Ropes, Chains and Goods 10-25kg North Island, Bulk Shipping Goods over 25kg North Island & SI Please email for Quote, Free Shipping NZ Wide For Fishing & Cast Nets Only, $0.10cents Catch Jigs & Lures GlowBite Products Only Not to be used for any other products Thanks, Click & Collect

ePRO Combi Inverter Charger 1600W/12V w/ Remote

The main task of the ePRO Combi Inverter Charger is to act as an uninterruptible AC power supply (UPS).

In case of a grid/generator failure or disconnection, the ePRO Combi immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads.

All this is achieved so fast, that even very critical loads like computers will continue to operate without any problems.

In case the grid/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter.

The connected loads are now supplied again by the grid/generator without any interruption.

Available in 12v, 24v or 48v models and ranging in sizes from 1600-3500w inverter output and 35-120A charger output, the ePRO Combi has a unit to suit nearly any application.

Additionally, the ePRO Inverter Charger offers features like:

  • AC Input Power Boost, which temporarily assists weak AC input sources when the connected load needs more power than available from the grid or generator.

  • AC Input Current Limit, which limits the maximum current consumed from the AC input source by the ePRO Combi. This limit is user adjustable.

  • Power Factor Corrected AC Input, which optimizes energy efficiency and makes sure that the maximum amount of charging current is available from your AC source.

  • Intelligent 4-stage charge programs, user programmable to fit any battery type.

  • Fully programmable inverter, transfer switch and battery charger parameters, using the Dashboard for Windows software.

  • Programmable alarm relay, for optimal control of external devices like generator starting or selective load disconnection.

  • Freely assignable trigger input, which allows the user to control the ePRO Combi by external events.

  • Temperature controlled fans, to guarantee silent operation under less than full load conditions.

  • Temperature compensated battery charging, using the standard supplied battery temperature sensor for maximum battery lifetimes.




EPC 1600-12

EPC 1800-24

Output power (1) Pnom









Output voltage / frequency

230 Vac ± 2% / 50 Hz ± 0.05%

Output waveform

True sinewave (THD < 5% 1 @ Pnom)

Input voltage (± 3% tolerance): Nominal




10.5 (2) – 16 Vdc

21 (2) – 32 Vdc

Maximum efficiency



No load power consumption (2) [ASB]

<10 W [2.0 W]

<12 W [2.0 W]

Charger stage

AC input voltage

185 – 270 Vac / 45 – 65 Hz / PF > 0.95

Maximum continuous charging current (4)



Standard charge voltage (bulk / float @ 25°C)

14.3V / 13.3V (programmable)

28.6V / 26.6V (programmable)

Charge algorithm

IUoUoP, intelligent 4-stage, temperature compensated (programmable)

AC Transfer Switch

Maximum continuous current

16 Ams

Transfer time (typical)

0 ms (inverter to mains) / <5 ms (mains to inverter)


ePROLink enabled



high/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage

DC connections

Two wires, length 1.5 meters, 50 mm (2)

AC connections

Screw terminals

Enclosure body size

351 x 210 x 114mm

Total weight

10.7 Kg

Protection class / operating temp. / storage temp.

IP21 / -20°C.. +50°C / -40°C.. +80°C (humidity max. 95% non-condensing)


Complies with IEC 60335-2-29 including Australian deviations.

Note: Specifications subject to change without notice.


Enerdrive Part # Description
5095500 ePRO Universal Remote with Cable Universal Remote Control and Cable
5092120 epro-combi-link ePRO Link cable to connect to the ePRO Universal Remote Control or to a Windows device
5092120 TBS Temperature Sensor Temperature Sensor (Included)
5055630 5055630 Alarm Expander Kit TBS Alarm expander board to suit ePro—expands alarm relays from 1 to 4

ePRO Combi 1600 to 3500 User Manual

ePRO Combi 1600 – 1800 Installation Guide

Universal Remote Control Owner’s Manual


Please note this is Subject to stock and is not sold in our store - It is Shipped from a seure Location in USA: 2 days DHL price or 1-2 weeks Standard post - Online Orders Only

On-Site Installation for this product is Available for $100 an Hour + GST - Please email us to book sales@actionoutdoors.kiwi


We also recommend

10mm x 250m Coil Manila Rope
Delivery weight: 17.3 kg
12mm x 250m Coil Manila Rope
Delivery weight: 26.6 kg

Browse this category: Inverters 12V 24V to 230V